Dyno

My husband took my car to a chassis dyno to see what he accomplished with the engine. It was built for street torque and he said he is pretty happy with the way it turned out.

The accelerator pump on the carb needs to be adjusted to give a little more gas when it's punched, and the secondary jets are going to be replaced with 2 sizes smaller to get the mixture at WOT a little better.

These are all rear wheel figures.

This was achieved with bolting on the intake, heads, and carb right out of the box. I plan to drive it like this for a couple years, including a few runs at the drags to see what it does, then the heads will be pulled and worked over to see what happens.